The Radio Pop-up TACO® uses our patented TACO® technology and durable nylon webbing to create a secure but easily accessible storage solution for a wide variety of items, including Mil/LE personal communication devices. • Features a pop-up pull tongue to easily remove communications devices without interfering with controls • Over-the-top bungee retention tab secures contents in place • TACO® -style design enables adjustable retention • MOLLE version includes HSGI® Clips for attachment to MOLLE or PALS • ABM version can mount to belts up to 2.25"
Dimensions: 3"L x 2"W x 6"H, .31 lbsMetric: 7.62cm x 5.08cm x 15.24cm, 141.52 gCovered by HSGI's® Lifetime Warranty. Made in the USA. Patent #9,759,536 High Speed Gear's® Adaptable Belt Mount (ABM) attachment format offers a sturdier alternative for mounting to belts. This attachment method uses a strip of durable, vinyl-backed, heavy-duty nylon laminate and reliable snap closure to create a belt loop. Three laser-cut slits enable the user to thread the loop smaller or larger for 1.5"-1.75", 1.75"-2" or 2"-2.25" belts, respectively. The inside of this fashioned belt loop features a patch of hook designed to match up with the interior loop of our rigger belts to lock the pouch in the desired position on your belt.
The ReFlex™ system was developed with direct input from active-duty medical personnel. The ReFlex is a two-piece system a med roll and depending on the operators system choice (a carrier, leg carrier, Hanger, or vehicle mount) that is designed to carry organized medical supplies with ambidextrous accessibility.
The system, constructed primarily with heavy-duty nylon laminate, allows rapid deployment of medical supplies. This system was designed around the medical supplies included in the U.S. Army-issued IFAK. • Features HANK™ (High Abrasion-Resistant Neoprene Kevlar® composite) grab handles for long-term durability • Can mount vertically or horizontally on belts 1.5 "-2.25", and horizontally on MOLLE• Intentional organization features put all supplies in easy reach • Carry handle and shock cord loops allow the roll to be attached to a patient, or hung from an I.V. rack• Gloves can be accessed via side slots with or without removing the roll from the carrier • "Mini" MOLLE allows for precise fit on belts as narrow as 1.5" or two-row MOLLE panels • Features loop panels on med roll and carrier for label patches
Full System - IFAKDimensions: 8" x 3" x 5.5", .485 lbs Metric: 20.32cm x 7.62cm x 13.97cm, 220g
Full System - HangerDimensions: 8" x 6" x 5.5", .485lbs Metric: 20.32cm x 15.24cm x 13.97cm, 220g
Full System - Leg RigDimensions: 7" x 8" x 1.1", .612 lbs Metric: 17.78cm x 22.86cm x 5.08cm, 227.5 g
- - - - - - - - - - - - - - - — — - - - - — - - - —- - - - - —- - - - — — - —- —
Med Roll Dimensions: 8" x 5.5" x 1", .22lbs Metric: 20.32cm x 7.62cm x 2.53cm, 100g Carrier Dimensions: 6" x 5.5" x 1", .27lbs Metric: 15.24cm x 3.97cm x 2.54cm, 120g
Hanger Dimensions: 6" x 6.5" x .75", .165lbs Metric: 15.24cm x 16.51cm x 1.90cm, 75g
Vehicle Mount Dimensions: 5.5"L x .125"W x 6"H, .21 lbs Metric: 13.97cm x .317cm x 15.24cm, 93.55 g
Leg Carrier Dimemsions: 7" x 8" x 1.1", .281 lbsMetric: 17.78cm x 22.86cm x 5.08cm, 127.5 g
***MEDICAL ITEMS NOT INCLUDED*** **MEDICAL CROSS PATCH IS NOT INCLUDED WITH REFLEX LEG RIG CARRIER***
Covered by HSGI's® Lifetime Warranty. Made in the USA. HSGI® Clips included.
The ReVive™ is a compact pouch designed to carry immediately-accessible, essential medical gear. The pouch is built around treating a gunshot wound and is intended to fit a chest seal, 4" trauma dressing, combat gauze, trauma shears and two pairs of nitrile gloves, but will also fit other similar items. The patent-pending RipCord™ insert enables the contents to be quickly and easily deployed within a self-contained harness, preventing users from fumbling for the needed item or dumping the contents of the pouch. • Patent-pending, quick-pull RipCord design allows one-handed, single-motion access to supplies • Features HANK™ (High Abrasion-Resistant Neoprene Kevlar® composite) pull tab for easy, no-look access • Elastic RipCord organizer keeps supplies together • Durable, stretch-woven material compresses contents, keeping profile small • External glove pockets allow access to gloves without opening pouch • Adjustable cinch on main compartment opening • Features HANK anchor loops for attaching a tourniquet or other items • Includes rear slot for medical shears • "Mini" MOLLE allows for precise fit on belts 1.5"-3" (adjusts in .5" increments) or two-row MOLLE panels or larger • Features loop panel for patches (Medical Cross Patch included) ***MEDICAL ITEMS NOT INCLUDED*** Dimensions: 4"L x 3.25"W x 5.25"H, .262 lbs Metric: 10.16cm x 8.255cm x 13.34cm, 118.84 g
Covered by HSGI's® Lifetime Warranty. Made in the USA. HSGI® Clips included.
This compact leg rig features three rifle TACOs® and is perfect for a day at the range, a training class or in the field when you want to run a low-profile set up. The TACO® is constructed from injection-molded polymer brackets, heavy-duty nylon and shock cord lacing to both expand and lock just about any magazine in place. • Securely holds most rifle magazines• Magazines deploy easily and silently on demand• Also fits certain radios, flash bangs, and smoke grenades• Strip of loop fastener sewn inside for additional contact and grip Patent #9,759,536 The padded leg panel attaches to your belt in two places for comfort and function. The padded mesh back and rubberized leg strap ensure performance and stability. Running, jumping or lunging will not displace this panel from where you want it. Due to design changes, the loops used to attach to belts now mimic the Leg Rig V1 and Double Decker® Leg Rigs and remain on the belt allowing quick attachment and detachment. Note: TACOs® are threaded together and cannot be reused in other configurations.
This unique pouch is constructed from injection-molded polymer brackets, heavy-duty nylon and shock cord lacing to both expand and lock just about any magazine in place. • Securely holds most rifle magazines• Magazines deploy easily and silently on demand• Also fits certain radios, flash bangs, and smoke grenades• Strip of loop fastener sewn inside for additional contact and grip
High Speed Gear's® Adaptable Belt Mount (ABM) attachment format offers a sturdier alternative for mounting to belts. This attachment method uses a strip of durable, vinyl-backed, heavy-duty nylon laminate and reliable snap closure to create a belt loop. Three laser-cut slits enable the user to thread the loop smaller or larger for 1.5"-1.75", 1.75"-2" or 2"-2.25" belts, respectively. The inside of this fashioned belt loop features a patch of hook designed to match up with the interior loop of our rigger belts to lock the pouch in the desired position on your belt.
Dimensions: 3"L x 1"W x 5"H, .18 lbsMetric: 7.62cm x 2.54cm x 12.7cm, 81.64 g
Covered by HSGI's®Lifetime Warranty.Made in the USA. HSGI®Clips included. NSN# 8465-01-630-6754 Patent #9,759,536
The TACO® LT functions like the traditional TACO® but weighs 25% less with our new injection-molded polymer brackets and improved laminate front and back. • Magazines are all held securely • Deployed easily and silently on demand • Takes up only three horizontal inches on your platform• MOLLE version includes HSGI® Clips for attachment to MOLLE or PALS • ABM version can mount to belts up to 2.25" Dimensions: 3"L x 1"W x 5"H, .13 lbs Metric: 7.62cm x 2.54cm x 12.7cm, 58.97 g
Covered by HSGI's® Lifetime Warranty. Made in the USA. Patent #9,759,536 High Speed Gear's® Adaptable Belt Mount (ABM) attachment format offers a sturdier alternative for mounting to belts. This attachment method uses a strip of durable, vinyl-backed, heavy-duty nylon laminate and reliable snap closure to create a belt loop. Three laser-cut slits enable the user to thread the loop smaller or larger for 1.5"-1.75", 1.75"-2" or 2"-2.25" belts, respectively. The inside of this fashioned belt loop features a patch of hook designed to match up with the interior loop of our rigger belts to lock the pouch in the desired position on your belt.
Experience ultimate comfort and support with HSG: SF WRAP PADS. Featuring SmartFlex™ Non-Newtonian technology, these pads absorb shock and reduce fatigue for a smooth carry. Use them in a variety of configurations for maximum versatility. Trim for a personalized fit. Comes as a set of 2 with One Wrap straps. Upgrade your gear now!
Experience the ultimate convenience with the HSG Shot Shell Tray V2. Its innovative design offers two hook-backed trays, each capable of holding five 12-gauge shotgun shells. Plus, the added MOLLE platform ensures compatibility with PALS platforms. Proudly made in the USA and backed by HSGI's Lifetime Warranty. HSGI Clips included.
The Slick Kydex® Handcuff TACO® is a hard-sided TACO® created to provide the smoothest, quickest deployment of handcuffs while also proving a streamlined look. Comp-Tac® uses aircraft-grade Kydex®, which has a smooth inside finish, and is resistant to sweat and solvents. This pouch fits both chained and hinged cuffs, including ASPs®. Combining Comp-Tac's® Kydex® manufacturing capabilities with HSGI's® versatile TACO® design provides users the best of both worlds in manufacturing and use. • 100% aircraft-grade Kydex® body gives a smooth finish for easy insertion and draw (.080 thickness) • Fits both chained and hinged cuffs, including ASPs® • Kydex® will hold up to the weight of handcuffs without bending, sagging or deforming • Kydex® does not hold water and won't add weight from rain, humidity or sweat • TACO® hole pattern allows for stacking other items • Unique shock cord design allows for the use of all the most popular handcuffs in one style of pouch • Designed to match the look of the HSGI® Polymer TACOs® for a seamless look on the belt • Features removable 1" nylon snap closure for additional retention • Can be mounted to the belt or MOLLE with two HSGI® Universal Clips Covered by HSGI's® Lifetime Warranty. Made in the USA. HSGI® Clips included. This product is member tested and recommended by the National Tactical Officers Association (NTOA).
This modular padded belt system is the next generation of the HSGI® padded belt family. All the performance of our original system, but at a lower weight and lower profile. Can be purchased as a stand alone sleeve or with a 1.5" COBRA® belt with inner loop fastener.• .75" thick and 3.25" tall• Neoprene padding creates a "gel-like" comfort• Adds a level of grip that is unlike any other low-profile belt system on the market• Two access ports at 3 and 9 o'clock positions for the attachment of subloads, such as holsters and drop platforms, directly to the interior belt• Assembled with a removable HDPE stiffener to add stability• Designed for use with a COBRA® 1.5" or 1.75" Rigger BeltCovered by HSGI's® Lifetime Warranty. Made in the USA.See the HSGI® Clips 101 video above at 1:45 for how to attach pouches to our Slim-Grip® using our HSGI® Clips.IF YOU WISH TO ORDER A 1.5" RIGGER BELT TO MATE WITH THE SLIM-GRIP® BELT, YOU MUST SELECT IT AS AN OPTION WHEN ORDERING. PLEASE BE CAREFUL AND DELIBERATE WHEN SELECTING THE SLIM-GRIP® SIZE VS. THE RIGGER BELT SIZE
TO ACCURATELY DETERMINE THE PROPER SIZE PADDED BELT, TAKE THESE STEPS.
FIRST, DETERMINE THE SIZE GAP YOU WANT IN FRONT BETWEEN ENDS OF THE BELT. MANY PEOPLE PREFER AS LITTLE GAP AS POSSIBLE TO OFFER MORE MOLLE REAL ESTATE TOWARD THE FRONT.
ONCE YOU HAVE THIS DECIDED, TAKE A TAPE MEASURE AROUND YOUR WAIST WHILE WEARING YOUR EVERYDAY BELT. DO NOT BASE YOUR BELT MEASUREMENT ON YOUR PANT SIZE.
FINALLY, SUBTRACT THE GAP YOU WANT FROM THE WAIST MEASUREMENT. ORDER THE PADDED BELT CLOSEST TO THIS FINAL MEASUREMENT. IF YOU CHOOSE THE COBRA® BELT, YOU WILL NEED TO GO UP A FEW INCHES FROM YOUR STANDARD BELT SIZE TO ACCOMMODATE THE ADDED GIRTH CREATED BY PADDED BELT.
Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.Below is the total length of the SGPB for sizing:30.75" end to end - If you choose a COBRA® belt for this Slim-Grip®, the smallestCOBRA® you should order is Medium36.25" end to end - If you choose a COBRA® belt for this Slim-Grip®, the smallestCOBRA® you should order is Large41.25" end to end - If you choose a COBRA® belt for this Slim-Grip®, the smallestCOBRA® you should order is XL46.25" end to end - If you choose a COBRA® belt for this Slim-Grip®, the smallestCOBRA® you should order is 2X
Designed in collaboration with USMC sniper instructors, this versatile shooting support bag allows marksmen to stabilize their rifle in a variety of positions. The eccentric shape of the bag allows it to fit any number of odd shooting positions. Heavy duty materials and reinforced stitching allow this bag to handle the abuse of both the combat environment and fast passed competitive events. A large integrated fill port makes filling oradjusting fill level easy, and a webbing handle makes carrying or attaching the bag to gear fast and simple.
SHIPS UNFILLED – ADD SAND OR A LIGHTWEIGHT SHOOTING FILL OF YOUR CHOICE• Large opening allows easy filling or adjustment of fill amount• Hook & loop roll-up fill port keeps fill material secure• Bound edges and double stitching for durability• Ambidextrous carry handles• Made in USA; Berry amendment compliant
Bag Volume -
Small: 3/4 Gallon
Large: 1 Gallon
The Sniper Waist Pack was designed to be attached directly to a belt and developed with direct input from scout sniper instructors. The goal was a product the user could not lose or take off in case of an immediate E&E, giving them enough ammo/food/medical supplies to make it home.End pockets are open end to endThe pockets on each end are magazine pouches capable of holding up to three M4 magazines, MREs or lifesaving equipment Center pocket can be used for a med kit, cleaning kit or almost any other crucial items
Dimensions: 23.25"3.5"x 5".81 lbs Metric: 59.06cm x 8.89cm x 12.7cm, 368.77 gCovered by HSGI's® Lifetime Warranty. Made in the USA.
