Medical Pouches

The ReVive™ is a compact pouch designed to carry immediately-accessible, essential medical gear. The pouch is built around treating a gunshot wound and is intended to fit a chest seal, 4" trauma dressing, combat gauze, trauma shears and two pairs of nitrile gloves, but will also fit other similar items. The patent-pending RipCord™ insert enables the contents to be quickly and easily deployed within a self-contained harness, preventing users from fumbling for the needed item or dumping the contents of the pouch. • Patent-pending, quick-pull RipCord design allows one-handed, single-motion access to supplies • Features HANK™ (High Abrasion-Resistant Neoprene Kevlar® composite) pull tab for easy, no-look access • Elastic RipCord organizer keeps supplies together • Durable, stretch-woven material compresses contents, keeping profile small • External glove pockets allow access to gloves without opening pouch • Adjustable cinch on main compartment opening • Features HANK anchor loops for attaching a tourniquet or other items • Includes rear slot for medical shears • "Mini" MOLLE allows for precise fit on belts 1.5"-3" (adjusts in .5" increments) or two-row MOLLE panels or larger • Features loop panel for patches (Medical Cross Patch included) ***MEDICAL ITEMS NOT INCLUDED*** Dimensions: 4"L x 3.25"W x 5.25"H, .262 lbs Metric: 10.16cm x 8.255cm x 13.34cm, 118.84 g Covered by HSGI's® Lifetime Warranty. Made in the USA. HSGI® Clips included.

Read more less

The ReFlex™ system  was developed with direct input from active-duty medical personnel. The ReFlex is a two-piece system a med roll and depending on the operators system choice (a carrier, leg carrier, Hanger, or vehicle mount) that is designed to carry organized medical supplies with ambidextrous accessibility. The system, constructed primarily with heavy-duty nylon laminate, allows rapid deployment of medical supplies. This system was designed around the medical supplies included in the U.S. Army-issued IFAK. • Features HANK™ (High Abrasion-Resistant Neoprene Kevlar® composite) grab handles for long-term durability • Can mount vertically or horizontally on belts 1.5 "-2.25", and horizontally on MOLLE• Intentional organization features put all supplies in easy reach • Carry handle and shock cord loops allow the roll to be attached to a patient, or hung from an I.V. rack• Gloves can be accessed via side slots with or without removing the roll from the carrier • "Mini" MOLLE allows for precise fit on belts as narrow as 1.5" or two-row MOLLE panels • Features loop panels on med roll and carrier for label patches  Full System - IFAKDimensions: 8" x 3" x 5.5", .485 lbs Metric: 20.32cm x 7.62cm x 13.97cm, 220g Full System - HangerDimensions: 8" x 6" x 5.5", .485lbs Metric: 20.32cm x 15.24cm x 13.97cm, 220g Full System - Leg RigDimensions: 7" x 8" x 1.1", .612 lbs Metric: 17.78cm x 22.86cm x 5.08cm, 227.5 g - - - - - - - - - - - - - -  - — — - - - - —  - - - —- - - - -  —- - - - — — - —- —   Med Roll Dimensions: 8" x 5.5" x 1", .22lbs Metric: 20.32cm x 7.62cm x 2.53cm, 100g Carrier Dimensions: 6" x 5.5" x 1", .27lbs Metric: 15.24cm x 3.97cm x 2.54cm, 120g Hanger Dimensions: 6" x 6.5" x .75", .165lbs Metric: 15.24cm x 16.51cm x 1.90cm, 75g Vehicle Mount                                                                                     Dimensions: 5.5"L x .125"W x 6"H, .21 lbs Metric: 13.97cm x .317cm x 15.24cm, 93.55 g Leg Carrier Dimemsions: 7" x 8" x 1.1", .281 lbsMetric: 17.78cm x 22.86cm x 5.08cm, 127.5 g ***MEDICAL ITEMS NOT INCLUDED*** **MEDICAL CROSS PATCH IS NOT INCLUDED WITH REFLEX LEG RIG CARRIER*** Covered by HSGI's® Lifetime Warranty. Made in the USA. HSGI® Clips included.

Read more less

The C-A-T Elastic TQ Holder from North American Rescue was specifically designed to allow personnel to place their C-A-T® Tourniquet on their vest, gear or belt for rapid and easy access. It is made of 500D IR Signature Reduced Nylon with MOLLE/PALS-style connectors with end tuck instead of button snap. The Elastic Holder protects your tourniquet from the elements and has an easy-open hood design to completely clear the TQ for removal up down or outward. Tailored specifically for your C-A-T®, to protect it from exposure to the elements PALS/MOLLE-style strap with tuck finish eliminating the need for a button snap. Versatile attachment to the duty vest, gear or belt for rapid & easy access Easy-open quick release hood Extended elastic body for TQ release outwards under pressure 500D IR Signature Reduced Nylon NOTE: Accommodates both Gen 6 and Gen 7 C-A-T®Tourniquets (not included).

Read more less

The Laser Cut C-A-T® Holder was specifically designed to allow personnel to place their C-A-T® Tourniquet on their vest or gear for rapid and easy access. It is made of laser cut laminated Cordura nylon. With an innovative construction process this tourniquet holder weighs 50% lighter than traditional nylon TQ holders. The included snap-free PALS/MOLLE-style connectors ensure secure attachment to a duty vest, gear or belt (mounted vertically). To keep your C-A-T® TQ protected from the elements the Laser Cut C-A-T® Holder has an integrated cover with easy-open elastic pull tab. Constructed with laser cut laminated Cordura®nylon Easy Pull Elastic Cover PALS/MOLLE-style connections Accommodates GEN 6 and GEN 7 C-A-T® tourniquets Weighs less than traditional TQ holders No brass snaps or grommets to wear-out Super durable, yet 50% lighter than traditional nylon TQ holders Designed & built to easily integrate with new, USDoD laser-cut body armor (PCG3 and MSV) yet “backwards compatible” will easily mount to legacy-type MOLLE vests Laser-Cut “TQ” with contrasting background color 4 ea. front-mounted, laser cut MAPs (MOLLE Attachment Points) for “stacking”. Can easily stack or mount 2 pouches together saving precious plate carrier real-estate Deploys easily with one hand, integrated cover with snug, elastic pull-tab C-A-T® TQ sold separately NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)

Read more less

The C-A-T® Holder was specifically designed to allow personnel to place their C-A-T®Tourniquet on their vest or gear for rapid and easy access. It is made with MOLLE/PALS-style connectors. The C-A-T® Holder protects your tourniquet from the elements and has an easy-open elastic pull tab. Tailored specifically for your C-A-T®, to protect it from exposure to the elements PALS/MOLLE-style connectors for versatile attachment to the duty vest, gear or belt (mounted horizontally or vertically) for rapid & easy access Easy-open pull elastic tab with tourniquet ID patch – “TQ” NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)  

Read more less

The High Speed Gear Tourniquet TACO® is designed to retain most windlass tourniquets on the market. This tourniquet pouch is built to expand and contract like the rest of the High Speed Gear TACO® family of pouches, in order to fit your needs and preferences.  A perfect fit for any High Speed Gear belts or our Core Plate Carrier.  MOLLE compatible for any existing gear you might have as well.  A nice addition to a larger IFAK or medical pouch for your kit. Features / Specifications: Built from heavy-duty nylon Unique, adjustable shock cord design allows for the use of most windlass-style tourniquets, such as SAM® XT, C-A-T®, SOF® TT, and SOF® TT Wide tourniquets, in one pouch Streamlined interior prevents snagging Removable flap allows covered or open-top use "Hand-up" flap design lifts TQ up when opening to make it easier to grab under stress Loop fastener panel on front for label patches Includes "TQ" patch Four rows of laser-cut MOLLE provide flexibility to mount 1" up or 1" down Covered by HSGI's® Lifetime Warranty Made in the U.S.A. HSGI® Clips included  

Read more less

Designed to hold medical gear and grant immediate access to medical shears Medical shears are held securely by strap and snap in separate open compartment Main pouch utilizes 2 wide QUICK-PULL interior strap to aid in one handed removal of pouch contents MOLLE/PALS webbing on sides for additional modular pouches or the attachment of a tourniquet Designed to hold medical gear and grant immediate access to medical shears. Medical shears are held securely by strap and snap in separate open compartment. Main pouch utilizes 2 wide QUICK-PULL interior strap to aid in one handed removal of pouch contents.

Read more less